Samsudin Anis, Deni Fajar Fitriyana, Fajar Chairul Anam, Hendrix Noviyanto Firmansyah, Aldias Bahatmaka, Adhi Kusumastuti, Janviter Manalu, Januar Parlaungan Siregar, Tezara Cionita, Ahmad Jazilussurur Hakim, Sukarni Sukarni
Coconut shell waste is underutilized due to the high demand for coconut in Indonesia. To maximize the use value of the material, coconut shells are converted into biomass energy, specifically charcoal briquettes. Due to the rapid advancement of technology today, it is necessary to use equipment that can run automatically to increase productivity, reduce production time, and lower production costs. This research was conducted to make an automatic cutting tool based on an Arduino microcontroller. The first process identified with literature studies related to automatic briquette cutting tools. The second process is conceptualised by assessing several design variants, then the highest value is taken. The third process is designing by making detailed drawings per component. The fourth process of completing the design by assembling all the components that have been made, and then testing the Arduino-based automatic cutting tool. The results obtained by the automatic cutting tool produce a cutting consistency of 77.5% and produce a residue of 22.5%. From the test data, the Arduino-based automatic cutting tool can work more effectively and efficiently to increase production capacity. © (2024), (Asian Research Publishing Network). All Rights Reserved.
Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang, Semarang, Indonesia; Department of Fashion Education, Faculty of Engineering, Universitas Negeri Semarang, Semarang, Indonesia; Faculty of Engineering, Universitas Cenderawasih, Kota Jayapura, Indonesia; Faculty of Mechanical and Automotive Engineering Technology, Universiti of Malaysia Pahang Al-Sultan Abdullah (UMPSA), Pahang, Gambang, Malaysia; Centre for Automotive Engineering (Automotive Centre), Universiti Malaysia Pahang Al-Sultan Abdullah (UMPSA), Pahang, Pekan, Malaysia; Faculty of Engineering and Quantity Surveying, INTI International University, Negeri Sembilan, Nilai, Malaysia; Arka Tama Indonesia Ltd., West Java, Karawang, Indonesia; Center for Renewable Fuels Research (CRFR), Department of Mechanical and Industrial Engineering, Universitas Negeri Malang, Jl. Semarang, Malang, Indonesia; Center of Advanced Materials for Renewable Energy (CAMRY), Universitas Negeri Malang, Jl. Semarang, Malang, Indonesia
